AlexMos SimpleBGC


Ublox NEO-M8U UDR RAW USB Dongle receiver with 3D sensors

UBLOX NEO-M8U GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS RAW and UDR receiver with USB and SMA antenna connectors. UDR ready.

More details


45 items in stock

UBLOX NEO-M8U USB dongle receiver with SMA antenna connectors, including inertial 3D sensors, for your UDR systems, UAV systems, Robots, RC, FPV or other projects.


The NEO-M8U usb dongle receiver introduces u-blox’s Untethered Dead Reckoning (UDR) technology, which provides continuous navigation without requiring speed information from the vehicle. This innovative technology brings the benefits of dead reckoning to installations previously restricted to using GNSS alone and significantly reduces the cost of installation for after-market dead reckoning applications.

The strength of UDR is particularly apparent under poor signal conditions, where it brings continuous positioning in urban en­vironments, even to devices with antennas installed within the vehicle. Useful positioning performance is also available during complete signal loss, for example in parking garages and short tunnels. With UDR, positioning starts as soon as power is ap­plied to the module, before the first GNSS fix is available.

The NEO-M8U may be installed in any position within the vehicle without configuration. In addition to its freedom from any electrical connection to the vehicle, the on-board acceler­ometer and gyroscope sensors result in a fully self-contained solution, perfect for rapid product development with reliable and consistent performance.

 The intelligent combination of GNSS and sensor measure­ments enables accurate, real-time positioning at rates up to 20 Hz, as needed for smooth and responsive interactive appli­cations. Native high rate sensor data is made available to host applications such as driving behaviour analysis or accident reconstruction.

The NEO-M8U includes u-blox’s latest generation GNSS receiver, which adds Galileo to the multi-constellation recep­tion that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisition and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.


NEO-M8U USB dongle features:

  • 72-channel u-blox M8 engine  GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C  SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
  • On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
  • USB interface
  • Support active antenna
  • u-center GPS Evaluation Software
  • Extensive visualization and evaluation features
    • Supports AssistNow Online and AssistNow Offline A-GPS services,  OMA SUPL & 3GPP compliant
  • 1 USB port
  • Flash memory for firmware upgrade and settings inside in the module (can save setings without battery)
  • Battery for HOT module start
  • Dimensions with connectors: 75x25x13mm
  • Weight 16.5 gram
  • Fully assembled and ready to use


NEO-M8U features:

  • 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C  SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
  • Nav. update rate Concurrent GNSS: up to 20 Hz
  • Position accuracy 2 m CEP
  • UDR position error Typically <10% of distance covered without GNSS (up to 60 s)
  • Acquisition
  • Cold starts: 26 s
  • Aided cold starts: 3 s
  • Reacquisition: 1 s
  • Data logger  for position, velocity, time, and odometer
  • Sensitivity Tracking & Nav: –160 dBm
  • Cold starts (aided): –148 dBm
  • Hot starts: –157 dBm
  • Assistance AssistNow GNSS Online
  • AssistNow GNSS Offline (up to 35 days)
  • AssistNow Autonomous (up to 6 days)
  • OMA SUPL & 3GPP compliant
  • Crystall Oscillator 
  • Built-In RTC crystal 
  • Onboard 3D accelerometer and 3D gyroscope sensors
  • RAW data out, Code phase output
  • Odometer Integrated in navigation filter
  • Geofencing Up to 4 circular areas GPIO for waking up external CPU
  • Built-in Spoofing detection
  • Signal integrity Signature feature with SHA 256
  • Data-logger For position, velocity, time, and odometer data
  • Position, speed, acceleration, heading, heading rate, attitude, time output
  • Active and passive Supported antennas


No products

Shipping $0.00
Total $0.00

Check out