AlexMos SimpleBGC

Search

NEO-M8U UDR receiver with 3D sensors EMI protection +HMC5983 PRO

UBLOX NEO-M8U GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS RAW and UDR receiver with EMI protection wit HMC5983 magnetometr. Double SAW and LNA PRO version.EVAL module USB, UART, UDR ready.

More details

On sale On sale!
$139.99

82 items in stock

UBLOX NEO-M8U PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI protection and HMC5983 Magnetometer, including inertial 3D sensors, for your UDR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. Ready for unwanted signal interference or multipath blocking. (RTK Ready)

 

This board designed for large scale drone or groud robots. Board have LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the UDR systems.


The NEO-M8U module introduces u-blox’s Untethered Dead Reckoning (UDR) technology, which provides continuous navigation without requiring speed information from the vehicle. This innovative technology brings the benefits of dead reckoning to installations previously restricted to using GNSS alone and significantly reduces the cost of installation for after-market dead reckoning applications.

The strength of UDR is particularly apparent under poor signal conditions, where it brings continuous positioning in urban en­vironments, even to devices with antennas installed within the vehicle. Useful positioning performance is also available during complete signal loss, for example in parking garages and short tunnels. With UDR, positioning starts as soon as power is ap­plied to the module, before the first GNSS fix is available.

The NEO-M8U may be installed in any position within the vehicle without configuration. In addition to its freedom from any electrical connection to the vehicle, the on-board acceler­ometer and gyroscope sensors result in a fully self-contained solution, perfect for rapid product development with reliable and consistent performance.

 The intelligent combination of GNSS and sensor measure­ments enables accurate, real-time positioning at rates up to 20 Hz, as needed for smooth and responsive interactive appli­cations. Native high rate sensor data is made available to host applications such as driving behaviour analysis or accident reconstruction.

The NEO-M8U includes u-blox’s latest generation GNSS receiver, which adds Galileo to the multi-constellation recep­tion that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisition and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.



NEO-M8U breakout board features:

  • 72-channel u-blox M8 engine  GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C  SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
  • On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
  • USB,  Uart (Tx,Rx), RAW data out
  • Tripple Band Antenna
  • u-center GPS Evaluation Software
  • Extensive visualization and evaluation features
    • Supports AssistNow Online and AssistNow Offline A-GPS services,  OMA SUPL & 3GPP compliant
  • 1 TTL UART port, 1 USB port
  • Time pulse LED 1
  • Flash memory for firmware upgrade and settings inside in the module (can save setings without battery)
  • Battery for HOT module start
  • Dimensions: Round 100 mm hole distance 45x45mm
  • Weight 46 gram
  • EMI and RFI protection
  • Ready for unwanted signal interference or multipath blocking 
  • Fully assembled and ready to use

 

 NEO-M8U features:

  • 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C  SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
  • Nav. update rate Concurrent GNSS: up to 20 Hz
  • Position accuracy 2 m CEP
  • UDR position error Typically <10% of distance covered without GNSS (up to 60 s)
  • Acquisition
  • Cold starts: 26 s
  • Aided cold starts: 3 s
  • Reacquisition: 1 s
  • Data logger  for position, velocity, time, and odometer
  • Sensitivity Tracking & Nav: –160 dBm
  • Cold starts (aided): –148 dBm
  • Hot starts: –157 dBm
  • Assistance AssistNow GNSS Online
  • AssistNow GNSS Offline (up to 35 days)
  • AssistNow Autonomous (up to 6 days)
  • OMA SUPL & 3GPP compliant
  • Crystall Oscillator 
  • Built-In RTC crystal 
  • Onboard 3D accelerometer and 3D gyroscope sensors
  • RAW data out, Code phase output
  • Odometer Integrated in navigation filter
  • Geofencing Up to 4 circular areas GPIO for waking up external CPU
  • Built-in Spoofing detection
  • Signal integrity Signature feature with SHA 256
  • Data-logger For position, velocity, time, and odometer data
  • Position, speed, acceleration, heading, heading rate, attitude, time output
  • Active and passive Supported antennas 



Cart  

No products

Shipping $0.00
Total $0.00

Check out

PayPal

Search