AlexMos SimpleBGC

Search

Ublox InCase series NEO-M8U UDR RAW receiver with 3D sensors

Ublox InCase series NEO-M8U UDR RAW receiver with 3D sensors

InCase series UBLOX NEO-M8U GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS RAW and UDR receiver EVAL module USB, I2C, UART, SPI with UF.L antenna connectors. UDR ready.

More details


$94.99

75 items in stock

InCase series UBLOX NEO-M8U Reference Board with UF.L antenna connectors, including inertial 3D sensors, for your UDR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.

 

The NEO-M8U module introduces u-blox’s Untethered Dead Reckoning (UDR) technology, which provides continuous navigation without requiring speed information from the vehicle. This innovative technology brings the benefits of dead reckoning to installations previously restricted to using GNSS alone and significantly reduces the cost of installation for after-market dead reckoning applications.

The strength of UDR is particularly apparent under poor signal conditions, where it brings continuous positioning in urban en­vironments, even to devices with antennas installed within the vehicle. Useful positioning performance is also available during complete signal loss, for example in parking garages and short tunnels. With UDR, positioning starts as soon as power is ap­plied to the module, before the first GNSS fix is available.

The NEO-M8U may be installed in any position within the vehicle without configuration. In addition to its freedom from any electrical connection to the vehicle, the on-board acceler­ometer and gyroscope sensors result in a fully self-contained solution, perfect for rapid product development with reliable and consistent performance.

 The intelligent combination of GNSS and sensor measure­ments enables accurate, real-time positioning at rates up to 20 Hz, as needed for smooth and responsive interactive appli­cations. Native high rate sensor data is made available to host applications such as driving behaviour analysis or accident reconstruction.

The NEO-M8U includes u-blox’s latest generation GNSS receiver, which adds Galileo to the multi-constellation recep­tion that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisition and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.




NEO-M8U breakout board features:

  • 72-channel u-blox M8 engine  GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C  SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
  • On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
  • USB, I2C, SPI and Uart (Tx,Rx), RAW data out
  • Support active antenna
  • u-center GPS Evaluation Software
  • Extensive visualization and evaluation features
    • Supports AssistNow Online and AssistNow Offline A-GPS services,  OMA SUPL & 3GPP compliant
  • 1 TTL UART port, 1 USB port, 1 I2C port, 1 SPI port
  • Time pulse LED 1
  • Flash memory for firmware upgrade and settings inside in the module (can save setings without battery)
  • Battery for HOT module start
  • Dimensions: 36x18mm
  • Weight 3.3 gram
  • Fully assembled and ready to use
  • Can be easy mounted in your case by double sided tape
  • 12 pin JST SH connector
  • Output avail for use Time Pulse 1, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces

 

 NEO-M8U features:

  • 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C  SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
  • Nav. update rate Concurrent GNSS: up to 20 Hz
  • Position accuracy 2 m CEP
  • UDR position error Typically <10% of distance covered without GNSS (up to 60 s)
  • Acquisition
  • Cold starts: 26 s
  • Aided cold starts: 3 s
  • Reacquisition: 1 s
  • Data logger  for position, velocity, time, and odometer
  • Sensitivity Tracking & Nav: –160 dBm
  • Cold starts (aided): –148 dBm
  • Hot starts: –157 dBm
  • Assistance AssistNow GNSS Online
  • AssistNow GNSS Offline (up to 35 days)
  • AssistNow Autonomous (up to 6 days)
  • OMA SUPL & 3GPP compliant
  • Crystall Oscillator 
  • Built-In RTC crystal 
  • Onboard 3D accelerometer and 3D gyroscope sensors
  • RAW data out, Code phase output
  • Odometer Integrated in navigation filter
  • Geofencing Up to 4 circular areas GPIO for waking up external CPU
  • Built-in Spoofing detection
  • Signal integrity Signature feature with SHA 256
  • Data-logger For position, velocity, time, and odometer data
  • Position, speed, acceleration, heading, heading rate, attitude, time output
  • Active and passive Supported antennas 

 

Accessories:

 



Cart  

No products

Shipping $0.00
Total $0.00

Check out

PayPal

Search