AlexMos SimpleBGC


NEO-M8P RTK receiver Base or Rover EMI protection +HMC5983 X series

UBLOX NEO-M8P-2 High Precision GNSS receiver with EMI protection with HMC5983 magnetometr. SAW and LNA X series version.Base or Rover operation

More details


14 items in stock

X Series version UBLOX NEO-M8P

UBLOX NEO-M8P-2 Precise Point Positioning receiver X series version with SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and HMC5983 Magnetometer. Ready for RTK. Very strong signal for good price. Base or Rover operation


This board designed for large scale drone or groud robots. Board have high gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.


The NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox’s Real Time Kinematic (RTK) technology. The NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments. The base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies. The NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance.
The NEO-M8P modules enable the system integrator to access u-blox’s complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u‑blox’s RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.

• Centimeter-level GNSS positioning for the mass market
• Integrated Real Time Kinematics (RTK) for fast time-to-market
• Small, light, and energy-efficient RTK module
• Complete and versatile solution due to base and rover variants
• World-leading GNSS positioning technology


NEO-M8P-2 breakout board features:


  • On-board Ultra low noise 3.3V voltage regulator
  • USB, I2C (SDA,SCL) for magnetometer, Uart (Tx,Rx) interface
  • High Gain LNA systems with very low noise figure
  • Double Band Pass filter for noise rejection
  • u-center GPS Evaluation Software
  • Extensive visualization and evaluation features
  • Supports ARTK
  • 1 TTL UART port, 1 I2C port for magnetometer, 1 USB port
  • Time pulse LED, GEO LED, RTK LED
  • Backup battery
  • Dimensions: 100x100 mm
  • EMI and RFI protection
  • Weight 79 gram
  • Fully assembled and ready to use

Board can be used for a Base or Rover operation mode!

NEO-M8P Features:

Receiver type:

  • 72-channel u-blox M8 engine
  • GPS L1 C/A,
  • BeiDou B1I

Nav. update rate:

  • RTK up to 8 Hz
  • Carrier phase data up to 10 Hz

Position accuracy:

  • Standalone 2.5 m CEP
  • RTK 0.025 m + 1 ppm CEP

Convergence time:

  • RTK 2 min
  • Acquisition Cold starts 26 s
  • Aided starts 2 s
  • Reacquisition 1 s


  • Tracking & Nav 160 dBm 4
  • Cold starts 148 dBm
  • Hot starts 156 dBm
  • Reacquisition 158 dBm

AssistNow GNSS Online

OMA SUPL & 3GPP compliant

TCXO Oscillator

On-chip LNA with extra LNA for lowest noise figure

Active CW detection and removal

Extra onboard SAW band pass filter

Active and passive antennas Supported

Flash Memory

Survey-in base For generating sub-meter base station station positions 


Board can be used for a Base or Rover operation mode!


No products

Shipping $0.00
Total $0.00

Check out