AlexMos SimpleBGC

Search

UBLOX LEA-6T GPS receiver module with Precision Timing

UBLOX LEA-6T GPS receiver module with Precision Timing

UBLOX LEA-6T GPS receiver EVAL module USB, UART 

More details


$149.99

137 items in stock

UBLOX LEA-6T with Precision Timing  Reference Board with sma connectors for active  GPS antenna. Package include active High Gain GPS antenna. GPS-EVAL01-6T-SMA

 

The GPS-EVAL01-6T-SMA with Precision Timing Evaluation board makes evaluating the high performance of the u-blox 6 GPS positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The GPS-EVAL01-6T-SMA with Precision Timing is compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the GPS-EVAL01-6T-SMA with Precision Timing can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-Blox LEA-6T integrated sma connectors for High Gain GPS antenna.

 

GPS-EVAL01-6T-SMA features:

  • u-blox 6 Kickstart and SuperSense® indoor GPS technology inside
  • SuperSense Indoor GPS, -160dBm
  • Power Supply & Data Link via USB
  • USB 1.1 Device/USB V2.0 compatible
  • Ublox GPS Antenna
  • u-center GPS Evaluation Software
  • Easy to use
  • Extensive visualization and evaluation features
  • Supports AssistNow Online and AssistNow Offline A-GPS services
  • 1 USB port, 1 TTL UART port, 1 RS-232 port
  • Time pulse output LED and pin for time synhronization
  • Fully assembled and ready to use

 

The LEA-6T provide precision GPS timing for demanding positioning applications such as basestations. This module features user configurable frequency output and timepulse. An
accuracy of up to 15 ns is achievable by using the quantization error information to compensate the granularity of the time pulse. LEA-6T feature a time mode function whereby the GPS receiver assumes a stationary 3D position, whether programmed manually or determined by an initial self-survey. During stationary operation GPS timing is possible with only one visible satellite. This means that time can be output even under adverse signal conditions or in environments with poor sky visibility. A built-in time mark and counter unit provide precise time measurement of external event inputs. T-RAIM (Timing Receiver Autonomous Integrity Monitoring) is available
to detect faulty GPS measurements. Raw data is also provided. Each module is tested and inspected during production. The modules are qualified according to ISO 16750 Environmental conditions and electrical testing for electrical and electronic equipment for road vehicles.

 

Highlights:

  • 1 or 2 timepulse outputs (up to 10 MHz)
  • Output timepulse with at least one satellite in view
  • Stationary mode for GPS timing operation
  • Time mark of external event inputs
  • Raw data
  • UART, USB and DDC (I2C compliant) interfaces
  • Onboard RTC Crystal for faster warm and hot starts

 

LEA-6T features:

  • u-blox 6 position engine:
  • Navigate down to -160 dBm and -147 dBm cold start
  • Configurable power management
  • Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS, GAGAN)
  • Up to 5 Hz navigation rate
  • Anti-jamming technology
  • A-GPS: AssistNow Online and AssistNow Offline services, OMA SUPL compliant
  • Backward compatible (hardware and firmware); easy migration from LEA-5 or LEA-4 families
  • Based on AEC-Q100 qualified chips
  • Manufactured in ISO/TS 16949 certified sites
  • LCC package for reliable and cost effective manufacturing
  • Operating temperature range: -40 to 85°C
  • Microsoft® certified USB driver

Cart  

No products

Shipping $0.00
Total $0.00

Check out

PayPal

Search